High frequency vibrating fine screen
Manufacturer : MORETEC
Part number :
OEM Compatibility :
Category ：Screening
Description
Description
Equipment features
◎ The screen surface vibrates at high frequency and the screen box does not move. The vibration exciter is fixed on the screen box, and the excitation force drives the vibration system to vibrate the screen surface.
The vibration system is designed to work in the near resonance state, and the required vibration parameters can be achieved with a small driving force.
The vibration system is designed to work in a near resonance state, so that the required vibration parameters can be achieved with a small driving force. Because the screen box
does not move, the whole machine is supported by the second damping, the dynamic load is very small, without special foundation, can be placed and installed at will; the vibration system is designed to vibrate the screen surface by the vibration system.
The machine can be placed and installed at will;
High frequency vibration of the screen surface, frequency 50 Hz, amplitude 1-2 mm, vibration intensity of 8-10 times the acceleration of gravity, which is the highest vibration intensity in general.
High frequency vibration of screen surface, frequency 50 Hz, amplitude 1-2 mm, vibration intensity of 8-10 times the acceleration of gravity, 2-3 times the vibration intensity of general vibrating screen. The screen surface is self-cleaning, and the screening efficiency is high.
The self-cleaning ability of the screen surface is strong, the screening efficiency is high, and the processing capacity is large. It is very suitable for fine
Powder material screening, dewatering. The upper limit of feeding size is 15 mm, and the grading size is 0.043-3 mm.
0.043-3 mm;
The screen surface consists of three different layers of flexible screen mesh. The bottom layer is wire rope core polyurethane
The bottom layer is a wire rope-cored polyurethane carrier mesh, which is in direct contact with the exciter. The bottom layer is a steel wire rope core polyurethane carrier mesh, which is in direct contact with the vibration device.
The composite mesh is bonded together with two layers of stainless steel wire mesh, and the composite mesh is in contact with the material, and the mesh size is determined according to the requirements of the screening process, which has a high pore rate and a long service life. The screen is equipped with hooks at both ends.
It is convenient for tensioning and installation. The feeding buffer screen plate ensures smooth and uniform cloth, reduces the impact of materials on the working mesh (composite mesh), and prolongs the service life;
The installation angle of the screen can be easily adjusted at any time to adapt to different material properties and different screening operations. The wet screening installation angle of the mineral processing plant is generally in the range of 25±2°.
The installation inclination angle for wet screening in mineral processing plant is generally in the range of 25±2°, and the installation inclination angle for dry screening is generally in the range of 33±2°;
The vibration parameters of the screen machine adopt computerized adjustment and control, and the vibration parameters of each vibration system can be adjusted and set through software. In addition to the general working condition vibration parameters, intermittent vibration parameters can also be set.
In addition to the general working condition vibration parameters, the intermittent instantaneous strong vibration parameters can also be set to clean the screen at any time to keep the screen holes free from clogging;
The specially designed electromagnetic vibration system mainly adopts high-quality rubber parts, reliable in long-term operation; small power consumption, the power of each electromagnetic exciter is only 0.15 kW; the power of each electromagnetic vibration system is only 0.15 kW.
The power consumption is small, the power of each electromagnetic exciter is only 0.15 kW;
The sieve machine is divided into single channel and double channel, single layer and multi-layer, and adopts modular design, which can be flexibly designed according to specific applications;
◎ The side panels of the screen box and the middle partition plate are all made of steel plate with integral bending molding, and the frame is made of rectangular pipe profile welding assembly, which not only improves the overall rigidity of the screen machine but also makes the appearance of the equipment more beautiful; ◎ The power of each electromagnetic exciter is only 0.15 kW.
The frame is made of rectangular pipe profiles welded together, which not only improves the overall rigidity of the screen machine, but also makes the appearance of the equipment more beautiful;
◎ The screen can be configured with different types of electric control cabinets according to the different needs of customers, in order to realize parameter setting, remote centralized control, process recording and fault alarm and other additional functions.
◎ The screen can be equipped with different types of electronic control cabinets according to different needs of customers to realize parameter setting, remote centralized control, process recording and fault alarm.
Scope of use
Wet classification is mainly applied to the classification of fine-grained materials for ore dressing, which is 1-5 layers; Dewatering series is mainly used for the dewatering of tailings, quartz sand and coal slurry.
◎ The screen surface vibrates at high frequency and the screen box does not move. The vibration exciter is fixed on the screen box, and the excitation force drives the vibration system to vibrate the screen surface.
The vibration system is designed to work in the near resonance state, and the required vibration parameters can be achieved with a small driving force.
The vibration system is designed to work in a near resonance state, so that the required vibration parameters can be achieved with a small driving force. Because the screen box
does not move, the whole machine is supported by the second damping, the dynamic load is very small, without special foundation, can be placed and installed at will; the vibration system is designed to vibrate the screen surface by the vibration system.
The machine can be placed and installed at will;
High frequency vibration of the screen surface, frequency 50 Hz, amplitude 1-2 mm, vibration intensity of 8-10 times the acceleration of gravity, which is the highest vibration intensity in general.
High frequency vibration of screen surface, frequency 50 Hz, amplitude 1-2 mm, vibration intensity of 8-10 times the acceleration of gravity, 2-3 times the vibration intensity of general vibrating screen. The screen surface is self-cleaning, and the screening efficiency is high.
The self-cleaning ability of the screen surface is strong, the screening efficiency is high, and the processing capacity is large. It is very suitable for fine
Powder material screening, dewatering. The upper limit of feeding size is 15 mm, and the grading size is 0.043-3 mm.
0.043-3 mm;
The screen surface consists of three different layers of flexible screen mesh. The bottom layer is wire rope core polyurethane
The bottom layer is a wire rope-cored polyurethane carrier mesh, which is in direct contact with the exciter. The bottom layer is a steel wire rope core polyurethane carrier mesh, which is in direct contact with the vibration device.
The composite mesh is bonded together with two layers of stainless steel wire mesh, and the composite mesh is in contact with the material, and the mesh size is determined according to the requirements of the screening process, which has a high pore rate and a long service life. The screen is equipped with hooks at both ends.
It is convenient for tensioning and installation. The feeding buffer screen plate ensures smooth and uniform cloth, reduces the impact of materials on the working mesh (composite mesh), and prolongs the service life;
The installation angle of the screen can be easily adjusted at any time to adapt to different material properties and different screening operations. The wet screening installation angle of the mineral processing plant is generally in the range of 25±2°.
The installation inclination angle for wet screening in mineral processing plant is generally in the range of 25±2°, and the installation inclination angle for dry screening is generally in the range of 33±2°;
The vibration parameters of the screen machine adopt computerized adjustment and control, and the vibration parameters of each vibration system can be adjusted and set through software. In addition to the general working condition vibration parameters, intermittent vibration parameters can also be set.
In addition to the general working condition vibration parameters, the intermittent instantaneous strong vibration parameters can also be set to clean the screen at any time to keep the screen holes free from clogging;
The specially designed electromagnetic vibration system mainly adopts high-quality rubber parts, reliable in long-term operation; small power consumption, the power of each electromagnetic exciter is only 0.15 kW; the power of each electromagnetic vibration system is only 0.15 kW.
The power consumption is small, the power of each electromagnetic exciter is only 0.15 kW;
The sieve machine is divided into single channel and double channel, single layer and multi-layer, and adopts modular design, which can be flexibly designed according to specific applications;
◎ The side panels of the screen box and the middle partition plate are all made of steel plate with integral bending molding, and the frame is made of rectangular pipe profile welding assembly, which not only improves the overall rigidity of the screen machine but also makes the appearance of the equipment more beautiful; ◎ The power of each electromagnetic exciter is only 0.15 kW.
The frame is made of rectangular pipe profiles welded together, which not only improves the overall rigidity of the screen machine, but also makes the appearance of the equipment more beautiful;
◎ The screen can be configured with different types of electric control cabinets according to the different needs of customers, in order to realize parameter setting, remote centralized control, process recording and fault alarm and other additional functions.
◎ The screen can be equipped with different types of electronic control cabinets according to different needs of customers to realize parameter setting, remote centralized control, process recording and fault alarm.
Scope of use
Wet classification is mainly applied to the classification of fine-grained materials for ore dressing, which is 1-5 layers; Dewatering series is mainly used for the dewatering of tailings, quartz sand and coal slurry.
Parts List
